Rim Surface Exit Device

EDTBAR Series

The TH1100EDTBAR S e r i e s “touch bar” style exit devices are suitable for doors (hollow metal or wood) where there is no projection

on the surface. Manufactured of extruded Anodized Aluminum, the TH1100EDTBAR is durable enough for demanding applications and is

non-handed and reversible.

 

TH1100EDTBA

 

  • ANSI 3 Grade 2
  • Material: Extruded Anodized Aluminum push bar
  • Stainless Steel springs
  • Latch: Stainless Steel, 3/4” throw – 5/ 8” deadlatch
  • Backset: 2 3/4” Covers 161 prep
  • Strike: Surface mounted for 5/ 8” stop with shim
  • Projection: 2 1/2” – 17/ 8”
  • Stile: 4 1/4” minimum
  • Non-handed / SFWFSTJCMF
  • Door Thickness: 13/4” up to 2″
  • Door Width: 36″, can be field sized to 30″ (48″ available)
  • Mounting Height: Recommended installation at 41″ from finished floor to center line of push rail
  • Fasteners: Furnished with sheet metal and machine screws
  • Cylinder: Accepts key trim cylinders with flat tail piece
  • Fire Rated: Available – please specify Finishes: AL, DU, US32D

TH1100EDSV

  • Material: Extruded Anodized Aluminum push bar
  • Stainless Steel springs
  • Latch: Top pullman type, bottom bolt assembly
  • Door Height: 7′ standard
  • Backset: 2 3/4” on 4 1/ 2” minimum stile width – if less than 41/ 2″ backset becomes half of the exposed stile width
  • Strike: Top – surface mounted, Bottom – flat mortise or into threshold, vertical/rim application use DBLST double door strike
  • Projection: 21/ 2” – 17/8”
  • Stile: 41/ 2” minimum
  • Non-handed / reversible
  • Door Thickness: 13/4” standard
  • Door Width: 36″, can be field sized to 30″
  • Mounting Height : Recommended installation at 41″ from finished floor to center line of push rail
  • Fasteners: Furnished with sheet metal and machine screws
  • Cylinder: Accepts key trim with a flat tail piece
  • Fire Rated: Available – please specify Finishes: AL, DU, US32D